Jiangyin Tongxin Vulcanizing Machine Manufacturing Co., Ltd.
Jiangyin Tongxin Vulcanizing Machine Manufacturing Co., Ltd.
Add to Cart
Lightweight water cooled vulcanizing machine
Regardless of whether it is a steel cord core belt or other fabric layered belts or nylon layered belts, when performing a heat vulcanized belt joint, it is necessary to perform stepwise layering treatment on the belt joint portion, and then apply the glue to the layered portion , The core glue is filled in each layered part, and the face glue is bonded to the joint gap part for sealing treatment.
It can be seen from the above that the joint rubbers required for the joints of steel wire core conveyor belts are generally: heat vulcanized joint glue, unvulcanized joint core rubber, and unvulcanized joint surface rubber.
Hot vulcanization glue is mainly used for the connection between the conveyor belt and the joint material. The quality of the glue directly affects the adhesion of the joint material and plays an important role in the quality of the joint. Therefore, we must be careful in the choice of glue.
RAMIMTECH steel wire conveyor belt heat curing glue SK823, non-flammable, is one of the necessary materials for the thermal joints of conveyor belts. It is suitable for thermal joints of steel wire core conveyor belts, ordinary nylon conveyor belts and canvas conveyor belts. The viscosity between the vulcanized core rubber and the vulcanization of the conveyor belt improves the strength of the thermal joint of the conveyor belt.