Professional Heat Curing Adhesive Convenient Usage For Heat Vulcanized Joints

Hot vulcanized glue, belt heat vulcanized joint glue, heat vulcanized glue SK823

Imported hot vulcanization glue SK823 special for vulcanized joints of coal conveyor belts is a special adhesive for heat vulcanized joints of conveyor belts. It is widely used in Shenhua, Huaneng, Guanghui and other large energy and power units. In the field construction, Intermex hot vulcanizing glue can significantly improve the bonding strength of the joints of the conveyor belt and ensure the vulcanization effect.

Hot vulcanized glue SK823, suitable for ordinary cotton canvas conveyor belt, nylon conveyor belt, polyester conveyor belt, steel wire core conveyor belt, etc. The use of hot vulcanized glue SK823, the steel wire core conveyor belt joint steel wire is not easy to pull out the core, layered fabric with vulcanized joint, can significantly enhance the bonding effect of the joints, and ensure the strength of the joints of the belt.

Field operation case:

1. The ordinary layered conveyor belt is processed in a stepwise manner. After the processing is completed, an angle grinder and a tungsten steel polishing disc are used to polish the stepped surface in a roundabout way. , It is beneficial to enhance the adhesive force of the heat vulcanized joint of the conveyor belt).

2. Evenly apply the imported hot vulcanized glue SK823 for coal mine coal conveyor belt vulcanized joints on the polished surface of the conveyor belt joints and the unvulcanized core rubber and surface rubber used in the conveyor belt joints. Uniform).

3. Use a vulcanizing machine to heat up the joint surface and pressurize (when the temperature reaches 145 ° C, a constant temperature of 40-45 minutes is required). After the time is reached, stop heating.

4. After the vulcanizing machine has cooled down, remove the vulcanizing machine and use a rubber knife to trim the nylon conveyor belt joints. After the trimming, the vulcanization is completed.