Jiangyin Tongxin Vulcanizing Machine Manufacturing Co., Ltd.
Jiangyin Tongxin Vulcanizing Machine Manufacturing Co., Ltd.
Add to Cart
High-quality conveyor belt peeling machine
The belt peeling machine is used to fasten and clean the rubber layer on the head of the belt when preparing the belt joint.In addition, it can also be used for covering rubber and canvas, covering rubber and wire rope, and canvas of various fabric cores and wire rope cores. Separation. ,
Structure and composition
Traction device and road direction device
Scope of application
651-2200mm ordinary conveyor belts of various widths
Instructions:
1. According to the conventional method, center the conveyor belt, and cut the corresponding joints with a knife to separate the first layer;
2. Put the belt stripping machine into an appropriate position and fix it with a wire rope;
3. Turn on the power;
4. Use a clamp to clamp the separated first layer, start the motor, and use a cutter to cut the peeled part at an appropriate place;
5. After the first layer is peeled off, repeat the above relevant steps to peel off the second and third layers, etc. respectively;